well I finally got the tube bender back to my house and picked up the rollbar tubing and started the rollcage
![](/ubbthreads/images/graemlins/thumbs.gif)
here are a few progress pics of what I got done this week. Ron...
here is the first fitting of the main bar:
![](http://img207.imageshack.us/img207/6087/1002196uy3.jpg)
this picture is what the front bars will look like:
![](http://img123.imageshack.us/img123/7183/1002198ah1.jpg)
here is the main bar and the back bar in place:
![](http://img218.imageshack.us/img218/8246/1002200zd2.jpg)
fitted back into the cab:
![](http://img218.imageshack.us/img218/6518/1002201tz1.jpg)
here is where I cut the cab to move it back 3":
![](http://img442.imageshack.us/img442/8053/1002202rx7.jpg)
from the pass side with the bar tacked in place:
![](http://img218.imageshack.us/img218/7104/1002205nd5.jpg)
I decieded to put in a rear brace bar:
![](http://img138.imageshack.us/img138/2108/1002206xp7.jpg)
back bars setting in place:
![](http://img442.imageshack.us/img442/7594/1002208ns8.jpg)
lower rear bars mount area, right to the shock mounts:
![](http://img442.imageshack.us/img442/8183/1002209dy2.jpg)
upper area, I have to wait to weld these bars in till I get the back of the cab done and make the front bars, then finish all the welds and finish the chop top:
![](http://img138.imageshack.us/img138/8581/1002210we3.jpg)
and here is a pic of the filler piece for the added 3" to the cab:
![](http://img138.imageshack.us/img138/4783/1002211yt5.jpg)