Dana 60 pinion preload - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Dana 60 pinion preload

Print Thread

Dana 60 pinion preload #3212917 02/11/24 11:55 PM 02/11/24 11:55 PM
Joined: Mar 2008 Posts: 292 NY challenger451ci OP enthusiast
challenger451ci OP enthusiast Joined: Mar 2008 Posts: 292 NY	What are you guys setting up a Dana 60 pinion bearing preload at? I'm finding specs ranging from around 15 to near 40in-lbs with new bearings. Also, do you check with the carrier in place or just the pinion? I'll have a spool with 4.30 gear.

Entire Thread
Subject	Posted By	Posted
Dana 60 pinion preload	challenger451ci	02/12/24 03:55 AM
Re: Dana 60 pinion preload	CMcAllister	02/12/24 04:24 AM
Re: Dana 60 pinion preload	challenger451ci	02/12/24 04:47 AM
Re: Dana 60 pinion preload	cudaman1969	02/12/24 05:54 AM
Re: Dana 60 pinion preload	Cab_Burge	02/12/24 06:44 AM
Re: Dana 60 pinion preload	6PKRTSE	02/12/24 12:50 PM
Re: Dana 60 pinion preload	dvw	02/12/24 02:08 PM
Re: Dana 60 pinion preload	challenger451ci	02/12/24 05:17 PM
Re: Dana 60 pinion preload	challenger451ci	02/12/24 05:24 PM
Re: Dana 60 pinion preload	dvw	02/12/24 06:21 PM
Re: Dana 60 pinion preload	cudaman1969	02/12/24 07:30 PM
Re: Dana 60 pinion preload	GomangoCuda	02/12/24 08:35 PM
Re: Dana 60 pinion preload	challenger451ci	02/13/24 06:01 PM
Re: Dana 60 pinion preload	Cab_Burge	02/13/24 07:40 PM
Re: Dana 60 pinion preload	CMcAllister	02/14/24 01:17 AM
Re: Dana 60 pinion preload	BANDIT	02/14/24 04:16 PM
Re: Dana 60 pinion preload	Cab_Burge	02/12/24 06:27 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1