Here's a couple pics of the outside door handles for the truck, I actually lucked out and found a set of NOS outside door handles, as well as the inside door handles NOS before that, I found a place that offers a kit to French the headlights uses a 7" bulb, so probably go that direction with the lights.
I finished the engine, 408, RPM heads, have a set of Dakota shorty headers, 750 Holley, Weiand intake, 727 freshened, still need a 10" convertor. I am hoping to get the motor/trans sit in the chassis, weld in the mounts, then my buddy can start the body work on the cab, doors etc, (luckily doesn't need alot). any chance to get a picture of those outside door handles with a tape measure close to 'em ? TIA if possible !  
1970 'Cuda,Lime Light,499 Indy S/R's 10.70's @125,street driven ALOT!
1966 Barracuda 360,now a 5spd,Hemi Orange,Hot Rod Air,
New daily driver-2003 Ram 2500 Cummins 5.9
'69 Valiant 2-dr, sleeper!
New project---1938 Dodge truck, plan is a 360 with a A500, AC, Calvert rear susp., rack and pinion front with coils.
| 
