Originally Posted by FJ6AAR
Originally Posted by HemiStan
Originally Posted by FJ6AAR
Originally Posted by rickseeman
What you have is the most valuable hemi head. If they are decent you can swap them for new Edelbrocks or Mopar heads. But Mopars of course won't run with Edelbrock Victor Jrs. And if the valve covers are decent they are worth good money too.

Good to know, thanks for the reply. So, I guess the castings are good and there is nothing to worry about as long as they check out.


You have heads and valve covers. But do you have valve cover gaskets??…. They are specific to those heads and I do not believe they are being reproduced.

Stan

As luck would have it, there is a set on Ebay now. But I can easily make my own out of gasket material, have done it before but not for the K heads.
https://www.ebay.com/itm/295805039929?

I wouldn't try to make cork gaskets. You can find some eventually for a little less than $100. Fel Pro MS90007 intake gaskets have crossram gaskets included. That guy is always a little bit high but I'm glad he's out there supporting 65's.

2011 Drag Pak Challenger