Originally Posted by cudabill
Bullet Cams says that cam with solids will work fine.

Quote
If you run the solid lifters then hot lash the cam at .010/.010.
You will be fine and you can run as much spring as you want.
Kirk m


I just ran my jet boat over the weekend with a Hyd. roller cam on solids and started out with .006/.006 cold lash. Engine was pretty quiet but had a little noise when it was warmed up but still think it was quiet compared to the lash setting of a full solid setup.

AG.

1970 Challenger w/572 Hemi street car and my pride and joy. 1986 T-Type with 272 Stage 2 Buick V6 engine - True 8 second street car. Just updated the engine and put down 928 HP @ 35# boost to the ground on chasis dyno. 1976 Cee Bee Avenger Jet Boat - 460 Ford powered.