Max stroke in an iron Hemi Megablock

Print Thread

Re: Max stroke in an iron Hemi Megablock [Re: Hemi_Joel] #3177552 09/23/23 07:12 PM 09/23/23 07:12 PM
Joined: Jan 2003 Posts: 6,392 nielsville, minn. Q quickd100 master
quickd100 master Q Joined: Jan 2003 Posts: 6,392 nielsville, minn.	Is that the block I sold you Joel? With a 2 2 pin I had no trouble going to 4.75" I had real close clearance with 4 cam lobes, .060. Other than that I still think 4-7/8" would clear. The raised cam block is good for 5".

Entire Thread
Subject	Posted By	Posted
Max stroke in an iron Hemi Megablock	Hemi_Joel	09/23/23 09:13 PM
Re: Max stroke in an iron Hemi Megablock	quickd100	09/23/23 11:12 PM
Re: Max stroke in an iron Hemi Megablock	Hemi_Joel	09/23/23 11:27 PM
Re: Max stroke in an iron Hemi Megablock	quickd100	09/23/23 11:51 PM
Re: Max stroke in an iron Hemi Megablock	JERICOGTX	09/25/23 04:49 PM
Re: Max stroke in an iron Hemi Megablock	second 70	09/25/23 05:03 PM
Re: Max stroke in an iron Hemi Megablock	JERICOGTX	09/25/23 05:07 PM
Re: Max stroke in an iron Hemi Megablock	Hemi_Joel	09/25/23 05:09 PM
Re: Max stroke in an iron Hemi Megablock	Hemi_Joel	09/25/23 05:12 PM
Re: Max stroke in an iron Hemi Megablock	JERICOGTX	09/25/23 05:54 PM
Re: Max stroke in an iron Hemi Megablock	Blusmbl	09/25/23 09:51 PM
Re: Max stroke in an iron Hemi Megablock	B1duster	09/25/23 11:13 PM
Re: Max stroke in an iron Hemi Megablock	quickd100	09/26/23 09:50 AM
Re: Max stroke in an iron Hemi Megablock	Hemi_Joel	09/26/23 02:48 PM
Re: Max stroke in an iron Hemi Megablock	JERICOGTX	09/26/23 02:55 PM
Re: Max stroke in an iron Hemi Megablock	Hemi_Joel	09/26/23 03:51 PM
Re: Max stroke in an iron Hemi Megablock	JERICOGTX	09/26/23 04:26 PM
Re: Max stroke in an iron Hemi Megablock	Dragula	09/26/23 12:19 PM
Re: Max stroke in an iron Hemi Megablock	B1duster	09/26/23 02:03 PM
Re: Max stroke in an iron Hemi Megablock	Dragula	09/25/23 09:11 PM

Hop To