.090 overbore on '65 383? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer .090 overbore on '65 383?

Print Thread

Re: .090 overbore on '65 383? [Re: topside] #3163636 07/27/23 01:10 PM 07/27/23 01:10 PM
Joined: Oct 2006 Posts: 91 sweden C carter member
carter member C Joined: Oct 2006 Posts: 91 sweden	Had a 470 cu with 11.6:1, solid roller and -1 heads, engine block was a -71 383 block with 4.375 bore. Raced that engine for a couple of season with out any issues.

Entire Thread
Subject	Posted By	Posted
.090 overbore on '65 383?	lakerism	07/23/23 07:54 PM
Re: .090 overbore on '65 383?	67vertman	07/23/23 08:26 PM
Re: .090 overbore on '65 383?	Sniper	07/23/23 08:32 PM
Re: .090 overbore on '65 383?	ruderunner	07/23/23 09:09 PM
Re: .090 overbore on '65 383?	6PakBee	07/23/23 09:20 PM
Re: .090 overbore on '65 383?	John Brown	07/23/23 10:43 PM
Re: .090 overbore on '65 383?	cudaman1969	07/24/23 02:09 AM
Re: .090 overbore on '65 383?	lakerism	07/24/23 02:59 AM
Re: .090 overbore on '65 383?	slantzilla	07/24/23 03:22 AM
Re: .090 overbore on '65 383?	6PakBee	07/24/23 12:42 PM
Re: .090 overbore on '65 383?	Sniper	07/24/23 03:35 PM
Re: .090 overbore on '65 383?	stumpy	07/24/23 03:59 PM
Re: .090 overbore on '65 383?	topside	07/24/23 05:11 PM
Re: .090 overbore on '65 383?	Fat_Mike	07/24/23 07:00 PM
Re: .090 overbore on '65 383?	lewtot184	07/24/23 07:04 PM
Re: .090 overbore on '65 383?	cudaman1969	07/24/23 08:26 PM
Re: .090 overbore on '65 383?	poorboy	07/25/23 04:51 AM
Re: .090 overbore on '65 383?	ZIPPY	07/26/23 06:57 PM
Re: .090 overbore on '65 383?	topside	07/26/23 09:22 PM
Re: .090 overbore on '65 383?	carter	07/27/23 05:10 PM
Re: .090 overbore on '65 383?	Streetwize	07/31/23 01:46 PM
Re: .090 overbore on '65 383?	70X	08/07/23 12:53 AM
Re: .090 overbore on '65 383?	Cab_Burge	07/24/23 02:58 AM
Re: .090 overbore on '65 383?	340SIX	07/23/23 08:37 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1