Mopar Mitch:
Sorry about the delay in my response!

So the short answer is: NO, and that's because everything has been completely OUT of the engine bay for over a year now. So I literally have no point of reference at the moment, and the only option I would have had before I pulled the stock box out was to measure from the floor to 'somewhere'.

I'll be popping out to the garage this afternoon so let me compare the OEM vs Borgeson box and see if I can somehow get you the measurement you are looking for.

I was not concerned about this because my W2 build required me to move to a different set of headers, and those are the TTI pipes which do not go under the centerlink (where it's usually the tightest fit).