You might want to get a few 2" diameter steel pipe 3' or 4' long maybe about 4 or 5 of them so you can use them to "roll" a machine into a place the forklift can't go. When we had to move this old arbor/mandrel press into our old shop and then later get it out to move to another new shop the forklift wouldn't fit in the shop doorway. So we did like the Egyptian did and placed a couple of motorcycle chrome fork tubes under it and rolled it into the shop and then years later did the same to move it out. Two guys pushed it while one person kept taking the free tube from behind and moving it to the front. Worked great both times.