8-3/4 into F body? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 8-3/4 into F body?

Print Thread

Re: 8-3/4 into F body? [Re: modelmakerinc] #3142289 05/03/23 02:29 PM 05/03/23 02:29 PM
Joined: Jan 2005 Posts: 4,450 Michigan MarkZ Worthy
MarkZ Worthy Joined: Jan 2005 Posts: 4,450 Michigan	If you still run the ISO setup then you can use a 1 9/16" hole saw to open the spring perch to accept the locating pin and rubber isolator combination. Just bolt a plate to the underside of the spring perch so the arbor has something to bite into. 1987 Fifth Avenue - 512/518/D60

Entire Thread
Subject	Posted By	Posted
8-3/4 into F body?	slantzilla	05/02/23 05:02 AM
Re: 8-3/4 into F body?	Cab_Burge	05/02/23 06:55 AM
Re: 8-3/4 into F body?	moparjim79	05/02/23 10:56 AM
Re: 8-3/4 into F body?	modelmakerinc	05/02/23 03:00 PM
Re: 8-3/4 into F body?	slantzilla	05/02/23 04:13 PM
Re: 8-3/4 into F body?	TC@HP2	05/03/23 02:17 AM
Re: 8-3/4 into F body?	5thAve	05/03/23 04:26 AM
Re: 8-3/4 into F body?	70X	05/03/23 08:14 AM
Re: 8-3/4 into F body?	John_Kunkel	05/03/23 04:42 PM
Re: 8-3/4 into F body?	modelmakerinc	05/03/23 05:17 PM
Re: 8-3/4 into F body?	MarkZ	05/03/23 06:29 PM
Re: 8-3/4 into F body?	dvw	05/05/23 02:55 AM
Re: 8-3/4 into F body?	440newport	05/05/23 11:44 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1