drilling flex plate holes - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer drilling flex plate holes

Print Thread

Re: drilling flex plate holes [Re: Cab_Burge] #3138269 04/15/23 05:09 PM 04/15/23 05:09 PM
Joined: Mar 2006 Posts: 9,883 MI, usa dvw master
dvw master Joined: Mar 2006 Posts: 9,883 MI, usa	Drill them. Radius the hard edge. I've broken plenty of flex plates. But never once starting at bolt hole. Doug

Entire Thread
Subject	Posted By	Posted
drilling flex plate holes	bigblk66_coronet	04/15/23 02:23 PM
Re: drilling flex plate holes	Rhinodart	04/15/23 02:28 PM
Re: drilling flex plate holes	bigblk66_coronet	04/15/23 03:25 PM
Re: drilling flex plate holes	slantzilla	04/15/23 03:29 PM
Re: drilling flex plate holes	BDW	04/15/23 05:39 PM
Re: drilling flex plate holes	John_Kunkel	04/15/23 06:11 PM
Re: drilling flex plate holes	B1MAXX	04/15/23 06:31 PM
Re: drilling flex plate holes	bigblk66_coronet	04/15/23 10:43 PM
Re: drilling flex plate holes	moparx	04/16/23 10:01 PM
Re: drilling flex plate holes	Sniper	04/17/23 12:23 AM
Re: drilling flex plate holes	markz528	04/17/23 12:44 AM
Re: drilling flex plate holes	moparx	04/17/23 04:46 PM
Re: drilling flex plate holes	John_Kunkel	04/17/23 07:06 PM
Re: drilling flex plate holes	moparx	04/17/23 07:44 PM
Re: drilling flex plate holes	moparx	04/17/23 08:06 PM
Re: drilling flex plate holes	PhillyRag	04/17/23 09:16 PM
Re: drilling flex plate holes	dvw	04/18/23 11:29 AM
Re: drilling flex plate holes	TJP	04/17/23 01:57 AM
Re: drilling flex plate holes	cudaman1969	04/17/23 03:03 AM
Re: drilling flex plate holes	Cab_Burge	04/15/23 07:45 PM
Re: drilling flex plate holes	dvw	04/15/23 09:09 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1