So I decided to dig for my original and take caliper dimensions, the image attached shows what I got from my bushing, and short of the overall length I would have to say that it matches dimensionally. Of course overall length can be easily overcome since the shoulder height appears good, from memory I don’t recall if the added length would make a difference but suspect not. Mine appears deformed or a poor cut on the length opposite the shoulder, and why the large tolerance of .020” is shown

The outside dia of the shoulder is close enough that no one would be able to tell less calipers

The only other item that may be out would be the color, listed as white, where the original is more translucent/yellow, and may be a result of time.

I’d like to see one now, but suspect it’s good.

Wanted to post up after questioning the dimensions.