Pinion Snubber Install Torque Spec

Print Thread

Re: Pinion Snubber Install Torque Spec [Re: Ghoste] #3126017 03/02/23 08:14 PM 03/02/23 08:14 PM
Joined: Jul 2009 Posts: 794 massachusetts U.S.A. 1 1969ronnie super stock
1969ronnie super stock 1 Joined: Jul 2009 Posts: 794 massachusetts U.S.A.	Hi Ghost , Factory Service Manual , Section 16 Propellor Shafts and Universal Joints Section . Tightening Reference , Pinion Bumper Plate Screws 7- 1/4 Axle 150 INCH Pounds . Pinion Bumper Plate Screws for 8.75 Axle , 9-1/4 Axle , and the 9 - 3/4 DANA 60 Axle , 200 INCH Pounds Per Factory Service Manual ! Hope this Helps , Ronnie

Entire Thread
Subject	Posted By	Posted
Pinion Snubber Install Torque Spec	Ghoste	03/02/23 10:48 AM
Re: Pinion Snubber Install Torque Spec	moparx	03/02/23 06:03 PM
Re: Pinion Snubber Install Torque Spec	Ghoste	03/02/23 07:25 PM
Re: Pinion Snubber Install Torque Spec	1969ronnie	03/03/23 12:14 AM
Re: Pinion Snubber Install Torque Spec	Ghoste	03/03/23 10:12 AM
Re: Pinion Snubber Install Torque Spec	Sniper	03/03/23 01:45 PM
Re: Pinion Snubber Install Torque Spec	moparx	03/03/23 05:25 PM

Hop To