pushrod length with roller cam

Print Thread

Re: pushrod length with roller cam [Re: Stanton] #3120818 02/12/23 01:07 AM 02/12/23 01:07 AM
Joined: Oct 2005 Posts: 8,923 Ontario, Canada S Stanton Don't question me!
Stanton Don't question me! S Joined: Oct 2005 Posts: 8,923 Ontario, Canada	Quote 8.059 on exhaust and 8.072 on intake. exhaust valve has been sunk further in the head OR valve tip was ground more on the intake valve. Double check both of those lobes are on the base circle - rock the cam back and forth with a dial indicator on the lifter. .012" difference is only 1/4 turn on the adjuster and not visible to the eye Hydraulic cams are forgiving but I'd rather have a pushrod .010 too short than too long and possibly hitting the rocker at full lift Last edited by Stanton; 02/12/23 01:15 AM.

Entire Thread
Subject	Posted By	Posted
pushrod length with roller cam	bigblk66_coronet	02/12/23 12:34 AM
Re: pushrod length with roller cam	Cab_Burge	02/12/23 02:48 AM
Re: pushrod length with roller cam	Stanton	02/12/23 05:04 AM
Re: pushrod length with roller cam	Stanton	02/12/23 05:07 AM
Re: pushrod length with roller cam	Cab_Burge	02/12/23 05:48 AM
Re: pushrod length with roller cam	Stanton	02/12/23 03:07 PM
Re: pushrod length with roller cam	Stanton	02/12/23 03:19 PM
Re: pushrod length with roller cam	fourgearsavoy	02/12/23 08:23 PM
Re: pushrod length with roller cam	Cab_Burge	02/12/23 08:49 PM
Re: pushrod length with roller cam	RapidRobert	02/13/23 12:51 AM

Hop To