Big block timing cover removal

Print Thread

Re: Big block timing cover removal [Re: ZIPPY] #3117771 01/30/23 05:13 PM 01/30/23 05:13 PM
Joined: Jan 2003 Posts: 5,630 Detroit area 6PAX OP master
6PAX OP master Joined: Jan 2003 Posts: 5,630 Detroit area	Originally Posted by ZIPPY If you remove the oil pan &/or girdle it should come right off. If you don't want to remove the oil pan, take a strong blade and cut right through the oil pan gasket or sealer against the girdle at the point where the TC/Pan/Block all come together. Then concentrate your effort on prying/working the cover forward. At some point it usually seems the dowels are last thing holding it on + the reason why it's difficult to work back and forth. Yes, I was hoping to not have to remove the pan and girdle. I will try and do this. Thanks.

Entire Thread
Subject	Posted By	Posted
Big block timing cover removal	6PAX	01/30/23 05:36 PM
Re: Big block timing cover removal	CSK	01/30/23 05:49 PM
Re: Big block timing cover removal	ZIPPY	01/30/23 05:52 PM
Re: Big block timing cover removal	6PAX	01/30/23 09:13 PM
Re: Big block timing cover removal	Gabby63	01/30/23 09:37 PM
Re: Big block timing cover removal	Chargerfan68	01/30/23 09:48 PM
Re: Big block timing cover removal	ZIPPY	01/31/23 02:59 PM
Re: Big block timing cover removal	moparx	01/31/23 07:18 PM
Re: Big block timing cover removal	an8sec70cuda	01/31/23 07:42 PM
Re: Big block timing cover removal	ZIPPY	02/02/23 03:38 PM
Re: Big block timing cover removal	Cab_Burge	01/30/23 07:59 PM
Re: Big block timing cover removal	tjmarcus1	02/02/23 04:06 PM

Hop To