Originally Posted by moparx
one thing i have always wondered, what was the front wheel bolt pattern ?
if it was 4 1/2", were the hubs drilled that instead of the standard A-body 4", or were different hubs used ? if different hubs were used, what were they ?
another item i picked up from those pictures, it looks like the rear wheel openings were hacked out with an axe.
i'm guessing they were rough cut with whatever, then folded up into the opening so as to not have [too many] sharp edges ?
thank you for posting those pictures. up bow
beer


The rotors were used out of the parts bin and were 4-1/2" bolt pattern. The wheel wells were hacked pretty badly but what you see in the close up is bad taping of the gloss black they sprayed in the wheel wells after the hack job... scope

Buy Jim Schild's book on the Hemi A-Body's for more info...

https://www.manciniracing.com/19dabahessau.html

The funny thing about science is that if you change one miniscule parameter you change the entire outcome to the way you want it.

JB Rhinehart, Realist

A-Body's RULE!