Considering most of the typically used rods are forged offshore, I think it comes down to who does the final machining... unless you're looking at $1500+ rod sets.
FWIW, I had a question for 440 Source today; I also happened to ask if their 6.76" x .990" ARP 2000 rods are in stock and they're available. I don't know about your (OP's) build and have no idea whether they're a suitable option or not.
Last edited by Brad_Haak; 11/21/22 06:26 PM.
2021 Challenger 6.4L Scat Pack 1320
100% stock: 1.680, 11.894 at 113.75 (DA 175 ft)
weight reduction, wheels, tires, Hellcat air box: 1.661, 11.686 at 115.97 (DA 710 ft)
1973 Challenger 452 ci street/strip [2008]
pump gas, DOT radials: 1.454, 10.523 at 126.44 (DA 514 ft)
| 
