M/T et street radials - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech M/T et street radials

Print Thread

Re: M/T et street radials [Re: ToddP] #309418 05/06/09 08:57 AM 05/06/09 08:57 AM
Joined: Oct 2003 Posts: 3,698 NE Oklahoma V Von master
Von master V Joined: Oct 2003 Posts: 3,698 NE Oklahoma	Quote: 12.875" on a 10" rim @ 17 psi. Are you sure its 12.875 and not 11.875? The MT website shows the section width as 11.9? 72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72. Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.

Entire Thread
Subject	Posted By	Posted
M/T et street radials	Stroker Scamp	05/06/09 03:41 AM
Re: M/T et street radials	blownzoom440	05/06/09 08:55 AM
Re: M/T et street radials	QWK_ENUF	05/06/09 10:49 AM
Re: M/T et street radials	an8sec70cuda	05/06/09 11:46 AM
Re: M/T et street radials	ToddP	05/06/09 11:44 AM
Re: M/T et street radials	Von	05/06/09 12:57 PM
Re: M/T et street radials	BradH	05/06/09 01:57 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1