Exhaust comment(s)
- here are the Brad-Fab collector 45-degree elbow hookups next to the NOT 45-degree elbow TTI parts
- had to assemble the system w/ the stock pieces and will check w/ TTI about getting replacement pipes on which to perform the same mod
- installed the "dead soft" aluminum gaskets... noticed there's a slight non-flat surface on one of the collector hookups and I could see light between the gasket and the mating surfaces; I "shaved" that corner of the gasket to enable the surfaces to mate, but...
2021 Challenger 6.4L Scat Pack 1320
100% stock: 1.680, 11.894 at 113.75 (DA 175 ft)
weight reduction, wheels, tires, Hellcat air box: 1.661, 11.686 at 115.97 (DA 710 ft)
1973 Challenger 452 ci street/strip [2008]
pump gas, DOT radials: 1.454, 10.523 at 126.44 (DA 514 ft)
| 
