Originally Posted by VCODE
Originally Posted by 70sixpkrt
.


Are you using the carb H bolt 1-1/4 inch long. I took off carbs off a 340 -6 and someone cut them. Does not seem like the intake manifold treads a deep enough for the bolts without cutting them.
Thanks Bob

This picture is not my engine. I am running some stock bolts.

[img]http://www.imgur.com/hxlGUJt.gif[/img]
4-speed
3:54 Dana
13.01 @107.93 with street tires (not hooking up)