I have been searching for a solid lifter for the Gen 3 hemi. I have been told that Jesel does make one, but are in the $3500.00 range. I know quality cost $$$, but that is out of my budget. The only option I see is to buy a new set of lifters from Dodge and remove the guts and shim them up. I did buy the rocker setup from T&D, which is very nice, so I can adjust the lash. Years ago I used the Smith Brothers adjustable pushrods on a LS1 engine. On stock valve spring engines, they may be OK, but on a performance engine with high spring pressures, they flexed to much. .