Originally Posted by dvw
Originally Posted by John_Kunkel
IMO, it's easier to leave the console VB in place, use the PB cable and use the console adjustment procedure


John, wouldn't the larger groove in the cable allow for slop between the rooster comb and the cable itself? I've always been under the impression that the cable style, rooster comb, and manual valve must match .


I believe the rooster comb and manual valve are different between console shift and PB. The longer "groove" would cause problems one direction or the other when changing gears as that added slop would result in the manual valve not moving unless that groove is fully engaged in the different attaching arm.

See what Mr Kunkel has to say wink

Last edited by TJP; 09/15/22 09:29 PM.
www.tandmautomotive-omaha.com