Took a long drive Thursday and realized I was not happy with the ride control from OE type shocks.
These are now 10 year old NAPAs that seemed OK then.
This on a 70 RT slightly hopped up with 465 HP, tied frame, torque boxes
But I know there are better shocks out there. I just don't want to spend $600 on a set.
My bars are one size up and rear springs seem to have sufficient arc.
Sooo, If you have any suggestions for a street only application, I'm all ears.
Thanks, Joe
What exactly is the size of your Torsion bars?
One size up torsion bars from a stock 383 .90” would be .92” 440/Hemi size.
But to some that might mean the 1.00” common found upgrade bars that PST and other general suspension places sell.
Talked about this in another forum and I think Bilstein RCD shocks are now $550+.
Less than $400/set I think nowadays leaves you with:
KYB
Monroe Matic
Gabriel Classic
All those about $25 +/-