Alum Main Cap preference for RB build

Print Thread

Re: Alum Main Cap preference for RB build [Re: Blown 68 R/T] #3065939 08/06/22 11:11 PM 08/06/22 11:11 PM
Joined: Nov 2015 Posts: 879 Missouri J jwb123 super stock
jwb123 super stock J Joined: Nov 2015 Posts: 879 Missouri	I run aftermarket blocks now, but the last set Of aluminum caps I ran were from mancini. When you say they will not hold their shape, they must be line bored and honed, after installation. Are you saying they distort after proper machine work?

Entire Thread
Subject	Posted By	Posted
Alum Main Cap preference for RB build	Blown 68 R/T	08/06/22 10:38 PM
Re: Alum Main Cap preference for RB build	jwb123	08/07/22 03:11 AM
Re: Alum Main Cap preference for RB build	Blown 68 R/T	08/07/22 04:00 AM
Re: Alum Main Cap preference for RB build	Cab_Burge	08/07/22 04:57 AM
Re: Alum Main Cap preference for RB build	FurryStump	08/07/22 04:33 PM
Re: Alum Main Cap preference for RB build	Jerry	08/07/22 05:06 PM
Re: Alum Main Cap preference for RB build	Blown 68 R/T	08/07/22 05:24 PM
Re: Alum Main Cap preference for RB build	Blown 68 R/T	08/07/22 06:11 PM
Re: Alum Main Cap preference for RB build	FurryStump	08/08/22 02:20 PM
Re: Alum Main Cap preference for RB build	JohnRR	08/08/22 02:46 PM
Re: Alum Main Cap preference for RB build	Jerry	08/08/22 05:56 PM
Re: Alum Main Cap preference for RB build	Cab_Burge	08/08/22 06:20 PM
Re: Alum Main Cap preference for RB build	FastmOp	08/08/22 10:20 PM
Re: Alum Main Cap preference for RB build	FurryStump	08/09/22 03:42 PM
Re: Alum Main Cap preference for RB build	Cab_Burge	08/09/22 05:11 PM

Hop To