W2 stroker build - exhaust port match, or not?

Print Thread

Re: W2 stroker build - exhaust port match, or not? [Re: Diplomat360] #3063833 07/30/22 11:13 AM 07/30/22 11:13 AM
Joined: Sep 2014 Posts: 4,457 Washington M madscientist master
madscientist master M Joined: Sep 2014 Posts: 4,457 Washington	Originally Posted by Diplomat360 OK, thanks guys! I suspected I was already on the bigger side and really didn't want to touch anything else there. Will leave in as-is configuration. You can go in there and get the throat sized and the short turn cleaned up. Just don’t make it bigger. My next W2 build I’m going to spend some time and see if I can fit a 1.500 valve in there. If I can’t go that small I’ll go as small as I can that isn’t 1.600 as that valve is pretty big too. Just because you think it won't make it true. Horsepower is KING. To dispute this is stupid. C. Alston

Entire Thread
Subject	Posted By	Posted
W2 stroker build - exhaust port match, or not?	Diplomat360	07/29/22 12:44 PM
Re: W2 stroker build - exhaust port match, or not?	madscientist	07/29/22 07:13 PM
Re: W2 stroker build - exhaust port match, or not?	Cab_Burge	07/29/22 08:45 PM
Re: W2 stroker build - exhaust port match, or not?	Diplomat360	07/30/22 01:51 PM
Re: W2 stroker build - exhaust port match, or not?	madscientist	07/30/22 03:13 PM

Hop To