Water pump and housing sealant

Print Thread

Water pump and housing sealant #3061237 07/21/22 08:51 AM 07/21/22 08:51 AM
Joined: Jan 2003 Posts: 5,633 Detroit area 6PAX OP master
6PAX OP master Joined: Jan 2003 Posts: 5,633 Detroit area	I'm about to install my aluminum water pump and housing on my engine. I have a tube of Permatex Form-a-gasket #2 and a tube of Permatex Ultra black. Are either of these ok to use on the gaskets? It's been so long since I installed a water pump that I don't remember what I used the last time.

Entire Thread
Subject	Posted By	Posted
Water pump and housing sealant	6PAX	07/21/22 12:51 PM
Re: Water pump and housing sealant	W.I.N. Racing	07/21/22 04:27 PM
Re: Water pump and housing sealant	an8sec70cuda	07/21/22 05:16 PM
Re: Water pump and housing sealant	JERICOGTX	07/21/22 06:24 PM
Re: Water pump and housing sealant	moparacer	07/21/22 06:32 PM
Re: Water pump and housing sealant	Neil	07/21/22 06:40 PM
Re: Water pump and housing sealant	Cab_Burge	07/21/22 10:09 PM
Re: Water pump and housing sealant	Sinitro	07/22/22 12:26 AM
Re: Water pump and housing sealant	dvw	07/22/22 12:43 AM
Re: Water pump and housing sealant	RapidRobert	07/22/22 01:06 AM
Re: Water pump and housing sealant	MoonshineMattK	07/21/22 06:47 PM
Re: Water pump and housing sealant	AndyF	07/22/22 12:55 AM
Re: Water pump and housing sealant	6PAX	07/22/22 01:00 AM
Re: Water pump and housing sealant	Cab_Burge	07/22/22 02:24 AM
Re: Water pump and housing sealant	AndyF	07/22/22 02:43 AM

Hop To