Originally Posted by 440mopar
"If you can take a good clear shot in each converter the stator may have some ID on it that can help you determine stall speed.

Post some pics and I’ll see if it will help."

I was going to take pics but I looked inside and there is no i.d.

"I was going to say, put a tape measure on them."

They all measure 11" and 13" across the ring gear.


The ID I am talking about is not numeric or alphanumeric.
It’s a series of marks.
The ring gear doesn’t represent size, the impeller does. The “donut”.

Last edited by Transman; 04/30/22 01:01 PM.