Originally Posted by mopar65
Car sounds great Rick. Can you give me some engine details? I will I hope soon start my 5.7 stroked to a 397 build soon. So trying to find all the info I can on the gen3 hemi builds. My friend has a 71 plymouth duster with a 6.1 stroked to a 426. He has I think a 650 lift hydraulic cam . He had around 14.1 compression and has ran 9.50 at 143 I think in the 1/4 so far. Also there was a guy with a silver 72 dart that raced in drag week last summer. He has a 6.1 stroked to a 426 and has 11.1 compression
I dont remember what size cam he has, but his is also fuel injected and he finally got the dart in the high 9 in the 1/4 now. Sorry just trying to say I bet yours will run better than 10:00 flat in the 1/4 once you get it tuned




Rick rarely posts on here any more( if ever) his car ran in the 9.80’s with the gen 3. In the drag pack Challenger. Not sure on all the specs


69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, low 10.30’s 1/4
1.41 best 60 foot
6.56 at 104.17