Quote:

---

I've been away from the boards for quite some time, and some might remember me as "Chubs". Thanks!

---

A M/C should(A) hold LIGHT foot pressure for ~15 seconds & (B)pressure when you stomp on it. Basic test is to cap both ports with $5 worth of brass plugs from your parts store & a good(& properly bled) M/C will have a rock hard pedal with virtually no travel. With that being said I would bleed it on the car with the kit that has the 2 short rubber lines then cap it( w brass plugs) & if good, hook your hard lines up & bleed out the wheels. If you bleed the M/C then hookup the lines & bleed the wheels without capping the M/C to check it & it's bad you'll have to R&R it then bleed the wheels all over again . Do ya feel lucky