Acceptable Gear Pattern? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Acceptable Gear Pattern?

Print Thread

Re: Acceptable Gear Pattern? [Re: fourgearsavoy] #3028808 03/29/22 07:58 PM 03/29/22 07:58 PM
Joined: Mar 2022 Posts: 7 Auburn, PA T Tim B OP member
Tim B OP member T Joined: Mar 2022 Posts: 7 Auburn, PA	Okay, got it all buttoned up. About 18-19 in/lbs pinion turning torque. Does 29-30 in/lb turning torque with the center section fully assembled sound right? I'm right at .006-.007" backlash. Last edited by Tim B; 03/30/22 11:28 AM.

Entire Thread
Subject	Posted By	Posted
Acceptable Gear Pattern?	Tim B	03/25/22 10:02 AM
Re: Acceptable Gear Pattern?	GTX5877	03/25/22 02:23 PM
Re: Acceptable Gear Pattern?	Tim B	03/26/22 10:20 PM
Re: Acceptable Gear Pattern?	1969ronnie	03/27/22 12:24 AM
Re: Acceptable Gear Pattern?	fourgearsavoy	03/27/22 07:59 PM
Re: Acceptable Gear Pattern?	Tim B	03/29/22 11:58 PM
Re: Acceptable Gear Pattern?	fourgearsavoy	03/30/22 01:45 AM
Re: Acceptable Gear Pattern?	Tim B	03/30/22 03:29 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1