Member Dayclona (Mike) posted this a few years back:

"If you have access to McMaster Carr, meaning you need a business account to purchase,...McMaster has "weld studs", steel, PN# 93865A235 this should spec out for the Shaker application, the weld head is just under 5/8" in diameter, .083 thick, 1/4"-20 thread 1" long, pkg of 100, $14.58"



Last edited by GY3; 03/14/22 05:50 PM.
'63 Dodge 330
11.19 @ 121 mph
Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs.
10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.