Originally Posted by NTOLERANCE
Looking for a recommendation on a BBC rod.

Building a 470 low deck 400 based stroker. 3.9 stroke crank with 2.2 rod journals.


BBC rods are all over the place, I can buy a new set of 8 from $199.00 to $999.00

If you have used a BBC rod in a mopar, what brands/company did you have good results with?
What was your rod/piston combo?

Thanks


There are a few flavors of 2.2 rod journal for BB mopar cranks. You can have chevy diameter and width, or chevy diameter and mopar width. The aftermarket covers both but I would first see what is available that will match your crank specs. If its a true BB chevy rod journal my vote would me on Molnar.
AG.


1970 Challenger w/572 Hemi street car and my pride and joy. 1986 T-Type with 272 Stage 2 Buick V6 engine - True 8 second street car. Just updated the engine and put down 928 HP @ 35# boost to the ground on chasis dyno. 1976 Cee Bee Avenger Jet Boat - 460 Ford powered.