Dimension Needed from 440 or Hemi

Print Thread

Re: Dimension Needed from 440 or Hemi [Re: cudaman1969] #3011442 02/02/22 08:15 AM 02/02/22 08:15 AM
Joined: Feb 2005 Posts: 957 MI, Lapeer M maximus OP super stock
maximus OP super stock M Joined: Feb 2005 Posts: 957 MI, Lapeer	Cudaman. The oil pump sticks out 9.5 inches from C/L of the crankshaft. So that is a non clearance issue. Thanks for bringing it up. Have a JW housing and glide. The outermost edge of the bell housing is also 9.5 inches for C/L. So if the starter does not exceed the width of the bell housing, there should not be a problem.

Entire Thread
Subject	Posted By	Posted
Dimension Needed from 440 or Hemi	maximus	02/02/22 01:17 AM
Re: Dimension Needed from 440 or Hemi	AndyF	02/02/22 01:44 AM
Re: Dimension Needed from 440 or Hemi	440Jim	02/02/22 03:04 AM
Re: Dimension Needed from 440 or Hemi	cudaman1969	02/02/22 04:36 AM
Re: Dimension Needed from 440 or Hemi	maximus	02/02/22 12:15 PM
Re: Dimension Needed from 440 or Hemi	440Jim	02/02/22 09:29 PM
Re: Dimension Needed from 440 or Hemi	lewtot184	02/02/22 10:07 PM
Re: Dimension Needed from 440 or Hemi	Moparteacher	02/02/22 06:20 AM
Re: Dimension Needed from 440 or Hemi	440Jim	02/02/22 08:15 PM
Re: Dimension Needed from 440 or Hemi	cudaman1969	02/02/22 09:16 PM
Re: Dimension Needed from 440 or Hemi	jwb123	02/02/22 02:33 PM
Re: Dimension Needed from 440 or Hemi	DaveRS23	02/02/22 03:21 PM
Re: Dimension Needed from 440 or Hemi	W.I.N. Racing	02/02/22 05:24 PM
Re: Dimension Needed from 440 or Hemi	440Jim	02/02/22 07:33 PM

Hop To