Originally Posted by gregsdart
Originally Posted by RTSE4ME
I am going to try Silicon bronze mig on a 20ga sheet metal project with .023 wire.
You have any issues with feeding the soft wire?

The shorter the mig cable the better. It is recomended to use a liner of plastic(?) Or is it teflon? Ask one of the welder manufacturer techs. I run .030 wire and keep the cable to the mig gun as bend free as i can. It took some adjustment to get my deal going. I am using a steel liner.


.030 is some very heavy wire. I would for sure switch to .023. Makes a big difference.


69 GTX 68 Road Runner