HP MANIFOLDS - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer HP MANIFOLDS

Print Thread

Re: HP MANIFOLDS [Re: 572B1] #3010736 01/31/22 07:33 AM 01/31/22 07:33 AM
Joined: Jan 2003 Posts: 6,416 Abilene, Texas F fastmark master
fastmark master F Joined: Jan 2003 Posts: 6,416 Abilene, Texas	Like I said, you will have to take them off to clean them and put on a new gasket. Check them with a straight edge and you will see the warp in the middle. Mill them flat and your done.

Entire Thread
Subject	Posted By	Posted
HP MANIFOLDS	572B1	01/30/22 11:51 AM
Re: HP MANIFOLDS	DAYCLONA	01/30/22 12:26 PM
Re: HP MANIFOLDS	fastmark	01/30/22 01:20 PM
Re: HP MANIFOLDS	Dodgem	01/30/22 05:53 PM
Re: HP MANIFOLDS	Cab_Burge	01/30/22 07:22 PM
Re: HP MANIFOLDS	mgoblue9798	01/30/22 07:58 PM
Re: HP MANIFOLDS	572B1	01/31/22 02:39 AM
Re: HP MANIFOLDS	NITROUSN	01/31/22 03:27 AM
Re: HP MANIFOLDS	572B1	01/31/22 09:12 AM
Re: HP MANIFOLDS	fastmark	01/31/22 11:33 AM
Re: HP MANIFOLDS	JCFcuda	01/31/22 06:17 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1