Originally Posted by 6PakBee
The finished part of my shop is 25' X 50' with propane floor heat and 12' walls. I've looked at a number of mini-splits and it always boils down to complexity and no need for heat capabilities. Based on my insulation, it looks like I'd need about 26,000 BTU/hr of cooling. So I've decided to go this way.

Window Air Conditioner

Seems to be easier to install and cheaper IF all you want is A/C. All I have to do is cut a hole and wire it and I can handle that. We'll see next summer if this was a wise choice. shruggy


25x50 is a lot of area for one unit to cool even if it has the BTU capacity simply moving the air about will be tricky. Might be wise to think about two units, or more, spread out to handle the entire building. Otherwise you will have one area nice and cool and another not so much.