Quote:

thanks mr p i will order 1 monday i bought the car with it narrowed , i think im going with new drive shaft with 1350 joint also. thanks for all your help maks making a decision alot easier




I prefer to make them 2" X 3" or better is 2" X 4"
and cut it yourself. Just square the tube on the back
of the diff and use a set of dividers to scribe it
for the contour, I run it right out to the flange
EDIT
Make sure it clears your shocks

Last edited by MR_P_BODY; 04/25/09 09:21 PM.