Originally Posted by B1MAXX
Originally Posted by Harry's Taxi 2
Originally Posted by calrobb2000


hi

those shims are to keep the push rods from compressing the plunger too far into hyd lifters when heads and block have been milled with stock rocker assembly !

.020 " plunger depth is the goal !





up
upX2

To lessen valve float for a few more rpm on a hydraulic.


upX3


1996 Ram 1500 Sport
1968 road runner
1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019