Oetiker clamp for 3/8" - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Oetiker clamp for 3/8"

Print Thread

Re: Oetiker clamp for 3/8" [Re: autoxcuda] #2964719 09/16/21 02:26 PM 09/16/21 02:26 PM
Joined: Apr 2003 Posts: 1,331 Clinton, NJ N njmopar OP pro stock
njmopar OP pro stock N Joined: Apr 2003 Posts: 1,331 Clinton, NJ	Found more in meantime. Seems to be 157 or 170 depending on the OD of hose you use. 157 covers 13.5 - 15.7mm 170 covers 15.1 - 17mm These are both stainless, so not concourse correct.

Entire Thread
Subject	Posted By	Posted
Oetiker clamp for 3/8"	njmopar	09/16/21 03:12 PM
Re: Oetiker clamp for 3/8"	autoxcuda	09/16/21 06:06 PM
Re: Oetiker clamp for 3/8"	njmopar	09/16/21 06:26 PM
Re: Oetiker clamp for 3/8"	PLATINUM6BBL	09/16/21 06:56 PM
Re: Oetiker clamp for 3/8"	gtx6970	09/16/21 07:11 PM
Re: Oetiker clamp for 3/8"	autoxcuda	09/16/21 07:13 PM
Re: Oetiker clamp for 3/8"	njmopar	09/16/21 07:56 PM
Re: Oetiker clamp for 3/8"	autoxcuda	09/16/21 09:11 PM
Re: Oetiker clamp for 3/8"	bobby66	09/16/21 10:00 PM
Re: Oetiker clamp for 3/8"	autoxcuda	09/16/21 10:56 PM
Re: Oetiker clamp for 3/8"	fourgearsavoy	09/16/21 11:33 PM
Re: Oetiker clamp for 3/8"	autoxcuda	09/16/21 11:53 PM
Re: Oetiker clamp for 3/8"	njmopar	09/17/21 05:43 PM
Re: Oetiker clamp for 3/8"	MoparMike1974	09/19/21 04:57 AM
Re: Oetiker clamp for 3/8"	bremotorsports	09/19/21 01:53 PM
Re: Oetiker clamp for 3/8"	jb500	09/19/21 08:41 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1