Crank looks good so far. Yes it's a 440 source crank. I'll die check it this weekend but it looks good.

No gray in the pump pickup. It was small pieces that built up in the rod throw oil holes. Had some in the filter as well. You can see the rtv in the oil hole of the crank in pic.

Have a few lifters spread slightly, nothing major but need replaced. All wheels roll sweet still.

About 20 psi. I keep my clearances to myself. I'm not going to give away everything.

3 runs ago was a new best ET at 4.800 4 runs ago was new best MPH at 162. Turning 7600 or so