Long story short, i was changing the converter in the car and i used my button connected to the relay to bump the motor over to take out the converter bolts. Pull trans, swap converter and put everything back together. Hit the button i had connected to the relay and the motor spun about a eight of a turn and that was it. I have not been able to get the motor to crank yet. I put a breaker bar on the on crank to finish getting the converter bolts in so the motor will spin. One thing i notice is the car will have power but if i try to start the car, it loses all power. None of the lights will come on or the dome light. If it sits for a minute, the lights will start to work again. I am not great with electrical. I tried checking all the grounds in the car, cleaned all the connections on the relay and the bulk head connector in the fire wall. Pulled the headlight switch to check the terminals. I need some advice. I have to be missing something.