1.6 rockers and 440 valve covers

Print Thread

Re: 1.6 rockers and 440 valve covers [Re: larrymopar360] #2941912 07/10/21 09:17 PM 07/10/21 09:17 PM
Joined: Mar 2010 Posts: 1,061 Atlanta, GA M mgoblue9798 super stock
mgoblue9798 super stock M Joined: Mar 2010 Posts: 1,061 Atlanta, GA	Originally Posted by larrymopar360 Originally Posted by mgoblue9798 Originally Posted by larrymopar360 Good info thank you! Trying to buy crate engine and many have 1.6's but I need/want stock valve covers because I like and to fit under booster on truck Larry I will be retrofitting a hydroboost system for the extra room since the small booster is now unobtanium. I thought rockauto had them but now I see its "return and rebuild" so I guess I still need booster. Dang I thought I had this one checked off. I have mounts, oil pan, valve covers and kickdown. I wish Bouchillon would start selling them again. https://bouchillonperformance.com/inc/sdetail/428/432 I sent them an email asking if they might start and I'm ready to buy. I have read that some have been able to squeeze in a 440 with the big booster, but I suspect it was with worn out pancaked motor mounts. I don't remember if there is enough room to relocate the big booster closer to the lt fender or not. Last edited by mgoblue9798; 07/11/21 10:15 AM.

Hop To