New style plastic windage tray

Print Thread

Re: New style plastic windage tray [Re: VernMotor] #2935082 06/20/21 04:26 PM 06/20/21 04:26 PM
Joined: Oct 2005 Posts: 277 Anchorage, Alaska metallicareload enthusiast
metallicareload enthusiast Joined: Oct 2005 Posts: 277 Anchorage, Alaska	I mudded in some RTV into where the timing cover meets the block and the rear main seal holder, let dry/setup. Other than that, it went on dry 440, 4-Speed, 3.54 1968, when Dinosaurs ruled the Earth

Entire Thread
Subject	Posted By	Posted
New style plastic windage tray	VernMotor	06/20/21 07:24 PM
Re: New style plastic windage tray	metallicareload	06/20/21 08:26 PM
Re: New style plastic windage tray	6PakBee	06/20/21 08:34 PM
Re: New style plastic windage tray	rebel	06/20/21 08:47 PM
Re: New style plastic windage tray	JERICOGTX	06/21/21 09:54 AM
Re: New style plastic windage tray	6PakBee	06/21/21 02:29 PM
Re: New style plastic windage tray	DaveRS23	06/20/21 11:09 PM
Re: New style plastic windage tray	BIGSTROKER	06/21/21 11:38 AM
Re: New style plastic windage tray	WV Runner	06/21/21 05:22 PM
Re: New style plastic windage tray	DaveRS23	06/22/21 12:26 AM
Re: New style plastic windage tray	Moparteacher	06/22/21 04:18 AM
Re: New style plastic windage tray	briane01	06/24/21 06:21 AM
Re: New style plastic windage tray	birdtracker	06/24/21 10:14 AM
Re: New style plastic windage tray	Montclaire	06/24/21 09:05 PM
Re: New style plastic windage tray	bee1971	06/24/21 09:18 PM
Re: New style plastic windage tray	VernMotor	06/25/21 02:10 AM
Re: New style plastic windage tray	metallicareload	06/25/21 04:30 PM
Re: New style plastic windage tray	Montclaire	06/25/21 08:26 PM

Hop To