Use 73 up A body spindles and parts as pre the Mopar action article
from years ago uses all mopar or jobber parts .
Do that and you will have a spindle about 3/8" shorter than the 880 came with.
The FMJ spindle is the same height.
Same front setup as my 64 300 had, I used the brakes off a 79 Cordoba. Spindle height is the same but the tie rods need shortening to fix the toe. I can't remember if I reused the 64's steering arm, or used the 79's. I want to say the 79's.
Don't forget that on both the FMJ and the 880 the LBJ is NOT part of the steering arm like it is on an A body.
