Originally Posted by RoadRunner
I have two engines to assemble in the next six months. What is the recommended fuel push rod to use. I recall some discussion on possible poor heat treating resulting in premature failure. Thanks.


The Howards one works great if you're using a billet roller type cam.

'63 Dodge 330
11.19 @ 121 mph
Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs.
10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.