Originally Posted by 68jim
For comparison purposes I checked the dipstick from my 68 RR. I know the dipstick is not a repro. Not sure if this info applies for 71...

I measured from the cap to the end and got 16 3/4"
Cap to F mark is 14 3/4"
Cap to A mark is 15 3/8"

Overall from end to top of the curved handle is 18 1/2"
The dipstick was cut and has two rivets, this is approximately 4"-4.5" measured from the cap. The overlap is 3/4"

I do not see a part number on this dip stick.

Hope this helps.

Jim


Excellent information Jim. I will check mine against yours. Mine definately has a part number as previously mentioned.

1970 Superbird 440 Six BBL, 4-Speed, Dana, FJ5
1969 Daytona Charger 440 4-Speed, Dana, EV2
1971 340 Challenger Conv. Flemington Speedway Pace Car, FC7
1970 340 Six Pack Callenger T/A 4-speed T8 Tan
1971 340 Challenger RT Formal Roof, EV2 w/ V2 Stripe & Orange Houndstooth
1969 Talladega Torino, 428CJ
1969 Gurney Special Cyclone Spoiler II, 351 Cleveland




"Id rather have a bottle in front of me than a frontal lobotomy" Ben Franklin 1755