Just put a pair of doors on a 21 Ram that hit a deer. They naturally are new door shells. Nothing damaged on the doors as far as regulators or anything like that. Just a swap of parts after they were painted. The front door has the auto up/down function. Usually the rest process has always been roll it all the way down and hold the button in the down position for 3-5 seconds. Then roll it up and repeat. I tried that multiple times with no success. When you hit the button up or down it will roll up or down about 1-2 inches then stop. Didn't matter if either hitting the button once or trying to hold it. It only moved that much either way. I tried having the door open and having the door shut doing the usual reset function and no luck. Anyone ran through this process?

Thanks

corey