Gen3 intake manifold height/hoodclearance

Print Thread

Re: Gen3 intake manifold height/hoodclearance [Re: 1Fast340] #2893646 02/27/21 11:22 AM 02/27/21 11:22 AM
Joined: Apr 2005 Posts: 936 Deland, Florida B biff426 super stock
biff426 super stock B Joined: Apr 2005 Posts: 936 Deland, Florida	The height of the short Ritter intake from the flange to flange (head flange to carb flange) is 7 inches. I needed 3 1/2 inches to the bottom of the scoop on a 66 Bbody using the TTI mounts. I would say it will be close. The motor will want all the height you can get to make max power. My experience is the taller the intake the more power/torque you will make. Of course your combination may vary.

Entire Thread
Subject	Posted By	Posted
Gen3 intake manifold height/hoodclearance	1Fast340	02/27/21 11:29 AM
Re: Gen3 intake manifold height/hoodclearance	biff426	02/27/21 03:22 PM
Re: Gen3 intake manifold height/hoodclearance	A39Coronet	02/27/21 06:39 PM
Re: Gen3 intake manifold height/hoodclearance	Kiddart	02/28/21 10:47 PM
Re: Gen3 intake manifold height/hoodclearance	ChrgrCuda	03/02/21 01:01 PM
Re: Gen3 intake manifold height/hoodclearance	Kiddart	03/03/21 05:02 PM
Re: Gen3 intake manifold height/hoodclearance	1Fast340	03/09/21 09:25 PM
Re: Gen3 intake manifold height/hoodclearance	Kiddart	03/11/21 03:24 PM

Hop To