Cutting Dana for a e- body

Print Thread

Re: Cutting Dana for a e- body [Re: 4406bbl] #2892052 02/22/21 10:44 PM 02/22/21 10:44 PM
Joined: Jan 2003 Posts: 771 Btween a rock and a hard place moparlulu OP super stock
moparlulu OP super stock Joined: Jan 2003 Posts: 771 Btween a rock and a hard place	Originally Posted by 4406bbl Originally Posted by moparlulu Cutting a truck Dana 60 down for a a 70 challenger and can’t remember how much offset the tubes need from side to side anyone? Forgetfulness sucks! If you are going to put big tires on the rear it would be wise to cut it to 68-70 b-body, or 67 b-body width, and use doc diff hangers. I would do it to any e-body.unless it was a 100 point car. 1-3/8" offset on the one I have. It shows 1 3/16” offset for most mopars, so I’ll use that. He “the owner” wants to stay with the wheels he has now.... he bought everything from The dr. Thanks for the help....

Hop To