Deck Thickness, How Thin is Too Thin?

Print Thread

Deck Thickness, How Thin is Too Thin? #2856492 12/07/20 12:07 PM 12/07/20 12:07 PM
Joined: Jun 2015 Posts: 313 Northeast Indiana 7 73DAD OP enthusiast
73DAD OP enthusiast 7 Joined: Jun 2015 Posts: 313 Northeast Indiana	How thin of a deck would you consider as a 'no go'? My beater '66 hemi block is already .080" shorter than nominal, it needs further milling from some gouges in the deck. Some gorilla tried to pull out the 1/4" dowels with vicegrips & scarred it up. I haven't had the deck sonic'd yet, was just looking for some reference. Street use, standard head bolts/stud, stock iron heads.

Entire Thread
Subject	Posted By	Posted
Deck Thickness, How Thin is Too Thin?	73DAD	12/07/20 04:07 PM
Re: Deck Thickness, How Thin is Too Thin?	6PakBee	12/07/20 04:14 PM
Re: Deck Thickness, How Thin is Too Thin?	A727Tflite	12/07/20 04:59 PM
Re: Deck Thickness, How Thin is Too Thin?	hemienvy	12/07/20 05:47 PM
Re: Deck Thickness, How Thin is Too Thin?	A727Tflite	12/07/20 07:22 PM
Re: Deck Thickness, How Thin is Too Thin?	hemienvy	12/07/20 07:31 PM
Re: Deck Thickness, How Thin is Too Thin?	A727Tflite	12/07/20 11:19 PM
Re: Deck Thickness, How Thin is Too Thin?	gregsdart	12/08/20 01:01 AM
Re: Deck Thickness, How Thin is Too Thin?	73DAD	12/08/20 12:49 PM
Re: Deck Thickness, How Thin is Too Thin?	tubtar	12/08/20 02:41 PM
Re: Deck Thickness, How Thin is Too Thin?	dragon slayer	12/08/20 03:02 PM
Re: Deck Thickness, How Thin is Too Thin?	HardcoreB	12/07/20 07:14 PM
Re: Deck Thickness, How Thin is Too Thin?	A727Tflite	12/07/20 07:23 PM
Re: Deck Thickness, How Thin is Too Thin?	73DAD	12/07/20 08:13 PM

Hop To